Skip to content
Free shipping over $150
Store Locator

Country

Blog

Tips, projects and news from the SurfPrep shop.

Blog

RSS
  • Don't Try This With Your Planer Sander
    September 24, 2020

    Don't Try This With Your Planer Sander

    I visited a hardwood finishing components manufacturer today because they were going through a lot of 80 grit belts on their 3 head planer sander (planer, drum, combi running 80,120). The customer was extremely confused because the belts were leaving...

    Read now
  • Swirls
    April 1, 2020

    Swirls

    Anyone who has run a random orbital sanding machine is familiar with swirl marks, the radial scratches that stem from the orbital pattern of the sander itself. The random orbital sanding machine has two types of movements; the rotation at...

    Read now
  • A Tale of Two Grit Sequences
    March 26, 2020

    A Tale of Two Grit Sequences

    This is a story of a machine and two different ways of getting the job done. Both methods sound very similar at the outset, but the effect on the wood is not. Recently, I visited a customer in Rochester, NY....

    Read now
  • Where does your consistency come from?
    March 26, 2020

    Where does your consistency come from?

    I’m writing this article to start a conversion in the minds of the readers and the industry in general. I’ve been blessed in my career to have seen literally thousands of sanding processes and nearly the same number of variations...

    Read now
  • Stop! Don’t buy that wide belt sander!
    March 24, 2020

    Stop! Don’t buy that wide belt sander!

    This is a very difficult article to write without making some folks angry and some absolutely irate. Machinery salesmen have a vested interest in selling the machines they have on the floor instead of the machine the customer needs. What...

    Read now