Solid
Surface
From seam to sheen. One sanding system for matte, satin and gloss finishes.
Solid surface shows everything. Swirls, seam lines and dust scratches appear the moment light hits the surface. SurfPrep sanders, dust extraction and abrasives work as one system, so you get the same even scratch pattern on the countertop, the edges and the integrated sink.
Matte / Satin Sanding Schedule
Four steps. Every abrasive comes in 5″ and 6″ discs.
Want semi-gloss?
Do steps 1–3, then finish with White Non-Woven (SPWD5-25 / SPWD6-25).
Want high gloss?
Do steps 1–2, skip the foam, then finish with 1000-grit Lux (SP5SCD1000-10 / SP6SCD1000-10).
Need a different cut? White Lightning comes in 80–120, Blizzard Film in 180 and 320, and ProFoam in 10 mm and ½″ for contours. Using film, screen or paper? Always use a Pad Saver.
Explore Videos
Explore Sanders
Electric and pneumatic sanders recommended for the Solid Surface Sanding Schedule.
Explore Variety Packs
Recommended variety pack options for the Solid Surface Sanding Schedule.
Explore Abrasives
View all ›Abrasives used throughout the Solid Surface Sanding Schedule. Pick a size.
11″ Abrasives for GEM Sander
Cover large flat areas, like full countertops, in fewer passes.

Download the Sanding Schedule Flyers
Free printable flyers with every step and SKU for each finish. Download, print, and keep one at the bench.
Frequently Asked Questions
Which grit do I start with?
Start with 150-grit White Lightning only if you're removing seams or scratches. For heavier work, White Lightning also comes in 80, 100 and 120. If the surface is already flat, start at step 2 with 220 Blizzard Film.
What's the difference between matte and satin?
Only the final step changes. Maroon 320-grit Non-Woven gives a matte finish, Grey 800-grit gives satin, and White Non-Woven gives semi-gloss.
Do you make 11″ abrasives?
Yes. Blizzard Film, ProFoam and Non-Woven all come in 11″ for the GEM Sander and other large flat surfaces. You'll find them under the 11″ Abrasives tab above.
How do I sand contours, edges and integrated sinks?
Use ProFoam. The 5 mm disc handles most work, and the 10 mm and ½″ versions follow tighter contours. The sinks and tight corners video shows how.
Do I need dust extraction?
Yes. Dust trapped under the disc causes random scratches on solid surface. Pair your sander with a POV-8 or PIV-12 dust extractor.















