Accessories
-
Muffler Repair Kit for 3"X4" Storm Air Sander Part number on Manual is (SPA0095) -
Lever replacement for SurfPrep 3" X 4" Electric Ray sanders. -
3 2/3" X 7" Hook & Loop Backup Pads To be used with: https://surfprepsanding.com/product/3-2-3-x-7-storm/ -
3" X 8" Hook & Loop Backup Pads To be used with: https://surfprepsanding.com/product/3x8-electric-ray-sanders-copy/ -
SurfPrep Backup Pads come in a variety of options depending on the products you are using as well as the surface you're sanding.- Hook & Loop Backup Pads are made with smaller 'hooks' which are excellent for the ‘quick release’ of SurfPrep Foam abrasives.
- J-Hook Backup Pads have a longer hook design that works well with SurfPrep Pad Savers, Interface Pads, Film, Paper, & Non-Woven Discs/Pads.
- PSA are meant to be used with 'Pressure Sensitive Adhesive (sticky) backed abrasives for flat sanding.
- Original Backup pads are made with
-
SurfPrep Backup Pads come in a variety of options depending on the products you are using as well as the surface you're sanding.- Hook & Loop Backup Pads are made with smaller 'hooks' which are excellent for the ‘quick release’ of SurfPrep Foam abrasives.
- J-Hook Backup Pads have a longer hook design that works well with SurfPrep Pad Savers, Interface Pads, Film, Paper, & Non-Woven Discs/Pads.
- PSA are meant to be used with 'Pressure Sensitive Adhesive (sticky) backed abrasives for flat sanding.
- Original Backup pads are made with
-
O.D. ½” / I.D. ¼” Rated at 300PSI SurfPrep's Ball Swivel Air Hose allows operators to maneuver sander in and out of tight areas without any restrictions. The hoses are one-of-a-kind for a couple of reasons. First, the hose has an ergonomic, lightweight connection to the sander and never needs to be disconnected from the tool. This stops air leaks because the bearings are not going to become worn out like other hoses in the industry. -
set of 4 replacement screws for Backup Pad (rectangular sanders) 2.5mm L-Allen Wrench needed -
SurfPrep's 3" X 4" Hand Block is meant to be used with 3" X 4" Film & Foam abrasives. The pad allows easier hand sanding may not be the best choice at hand. -
set of 4 replacement screws for rectangular sanders. -
This vacuum hose package is to be used with SurfPrep's POV-8 Vacuum system.
This specific setup comes with the following parts:
- 1 Vacuum Hose Y-Splitter (SPPVYS)
- 1 Y-Splitter Electric Cord (SPPECYS)
- 1 Hose Connector (SPUHCMF)
- 12' Antistatic 25mm Vacuum Hose (SPOV25H)
-
If you currently own a SurfPrep sander and are deciding to go the 'dustless' route, we have conversion kits that make it easy to convert your tool over for vacuum sanding. Each kit includes the pieces necessary for converting your tool to vacuum: a conversion piece and a backup pad with vacuum holes. Keep in mind that PNEUMATIC sanders are available in 'Central Vacuum' and 'Self Generated Vacuum' options. ELECTRIC sanders are only available in 'Central Vacuum'.*TOOL NOT INCLUDED* -
This coupler will connect a 1" threaded vacuum hose to a 1" threaded vacuum hose.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
This vacuum port reducer is a 2" diameter. It will slide into the 2.25" unthreaded intake port of most vacuum systems. SurfPrep's 1" Vacuum Hoses will screw into the other side. We recommend purchasing SurfPrep's Vacuum Hose to screw into this reducer.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
Make sure to watch video to ensure you are able to complete this repair. These kits work for both ELECTRIC & AIR SANDERS -
This vacuum hose holder will hook into the POV-8 for organization. Newer version models of the POV-8 are equipped with the SPOVHH. *vacuum is not included -
This adapter will connect a 1" threaded vacuum hose to a 1" threaded vacuum hose. This part is static conductive and is meant to be used with static conductive vacuum systems.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
SurfPrep Sanders are compatible with almost any vacuum system! Here we are showing how to use our SPUHCMF to connect any SurfPrep Central Vacuum sander to your green Festool hose. It's quick and simple! This connector is only compatible with 25mm rubber-tip end vacuum hoses -
This vacuum adapter piece is for anyone who owns a different brand of vacuum that comes with a 2.5" style vacuum hose. We have taken multiple measurements to show you the closest diameter measurements in inches of the different vacuum hoses. The black adapter piece should slide in and create a tight seal with the vacuum hose. We recommend purchasing SurfPrep's Vacuum Hose to screw into this vacuum grey part of the adapter piece. Other brand of vacuum hoses can actually be very heavy, so we recommend purchasing a 12-foot long SurfPrep hose to attach to this piece.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
This vacuum adapter piece is for anyone who owns a different brand of vacuum that comes with a 1.5" ribbed vacuum hose. We recommend purchasing SurfPrep's blue vacuum hose OR flexible whip hose to screw into this adapter piece.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
The SurfPrep Vacuum Hose Quick Connect set will make it easy to attach and detach your 1" threaded vacuum hose to your SurfPrep sander. 2 pieces are included to make the quick connect:- SPUHCMF (screws into the vacuum port adapter on the back of SurfPrep sander)
- SPCUFF-25MM (screws into any 1" SurfPrep threaded vacuum hose & 'quick connects' to the SPUHCMF.
-
This vacuum adapter will slide over the end attachment of most vacuum systems that come with a 1.25" to 1 3/8" hose. It is NOT threaded. The black adapter piece should slide over and create a tight seal with the vacuum hole. We recommend purchasing SurfPrep's Vacuum Hose to screw into this vacuum adapter.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
This vacuum adapter will slide over the end attachment of most vacuum systems that come with a 1.25" to 1 1/8" hose. It is NOT threaded. The black adapter piece should slide over and create a tight seal with the vacuum hole. We recommend purchasing SurfPrep's Vacuum Hose to screw into this vacuum adapter.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
This vacuum adapter will slide over the end attachment of most vacuum systems that come with a 1.75" - 1 7/8" hose. It is NOT threaded. The grey adapter piece should slide over and create a tight seal with the vacuum hole. We recommend purchasing SurfPrep's Vacuum Hose to screw into this vacuum adapter.- VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
-
SurfPrep custom mugs by Sunset Hill Stoneware. Mugs are handcrafted in Wisconsin. Microwave safe, oven safe, dishwasher safe. MADE IN U.S.A. Eco-friendly -
Welcome to the sexiest aprons on the market! These 2 pocket aprons are a great quality and will help you look good while sanding. Make sure to share pictures on social media with #makingsandingsexy -
Cute bandanas for your #surfpups Small: 13.75" X 13.75" X 19" Large: 22" X 22" X 31" -
SurfPrep's vacuum sanders are equipped with a 1" female swivel coupler. We have created a line of 1" diameter vacuum hoses that connect directly to your SurfPrep Sander for a dust free sanding environment. -
Vent side covers for 3" X 4" Electric Ray. To be used when connected to a vacuum system for dust free sanding. (2 pieces included/2 needed for tool) -
Vent side covers for 3" X 4" Electric Ray. To be used when connected to a vacuum system for dust free sanding. (2 pieces included/2 needed for tool) -
Check out SurfPrep's new 'Drywaller's Sanding Pack'. The starter pack includes the 'Hand Sanding Block' along with a variety of SurfPrep's Film Abrasives in grits 80,120, & 220 (10 each grit) This combo is used to remove drywall compound and smooth the surface. It works best for sanding patch work! -
Foam variety packs are a great way to test out the variety of thicknesses and grits that will work best for the applications being sanded. Instead of purchasing a full box of foam abrasives, you will receive a kit that has (2) of each grit of SurfPrep foam we offer. Variety Packs are only available in Hook & Loop backing.
