3″X4″ Electric Ray Sanders
$586.29 – $677.43
Share This Product
Description
Purchasing a Sanding System with a Tool Box will save 5% on purchase of Tool Box
THIS IS NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES. CLICK HERE FOR KIT
SurfPrep’s 3″ X 4″ Electric Ray is power packed with 3 speeds (4,000, 7,000 & 9,000 RPM). It’s brushless outer-runner motor is constructed with bigger magnets, providing greater torque which saves energy compared to inner-runner motors. The tool’s computer board is completely protected with a patented rubberized seal preventing environmental contamination. Patented spindle bearing fan enhances life by keeping motor & bearings at a lower temperature. Electric Ray Sanders have significant energy cost savings compared to pneumatic sanders as well as two override protection programs to enhance the life of the tool.
3″ X 4″ Ray Specifications
- OPM – 4,000, 7,000 & 9,000 OPM
- Voltage – 110-120V
- Orbit – 3mm perfect orbit
- Weight – 2.47 Pounds
- Height – 4.17″ High
- Length – 7.32″ Long
- Cable – 12′ Hardwired Cable
- Material – Composite body, Steel Motor
- Size – 3″ X 4″ Footprint
*1 Year Manufacturer Warranty*
Click here for downloadable flyer – 3×4 Ray
Disclaimer: The SurfPrep Sanding System is designed to work as a complete system whereby SurfPrep branded sanders connect to and operate with SurfPrep branded dust extractors”. We have customers who have successfully connected SurfPrep brand sanders with other brands of dust extractors without incident of static electricity and full functionality of auto on/off features. SurfPrep branded sanders can connect easily to DIY STYLED vacuums with parts we provide, however SurfPrep DOES NOT guarantee freedom from static electric shocking which may very well occur due lower priced DIY vacuums not being outfitted with appropriate grounding components to stave off static shock. All SurfPrep sanders & dust extractors are fabricated with static conductive comments.
5 reviews for 3″X4″ Electric Ray Sanders
You must be logged in to post a review.
manu –
wow this truly an innovative product, i was comparing this to a Festool linear sander because cabinet profile sanding was driving me nuts…but this is a CLEAR winner on paper!! i really want to get the electric 3*4 kit from you all.
ANDREW WILSON –
I really thought long and hard about spending this much for a sander, and whether to buy this one over other options on the market. In the end, I am extremely pleased with this purchase. I’ve been replacing all the trim in my house, stripping old paint off jambs etc., and the task of sanding and preparing for paint has been made way easier with this tool. I purchased the system with a full assortment of abrasives which was a generous selection and great starting point, but expect to spend another couple hundred dollars to buy larger quantities of the ones you need most frequently. My favorite aspect of this tool is the form factor, it is light with multiple ways to grip and I’ve sanded for hours at a time without any fatigue. The dust collection has also been phenomenal using a little Ridgid shopvac, I really don’t notice much dust after hours of hard sanding. Doing tough sanding on trim profiles and for stripping will go through abrasives quickly, so again prepare to spend a bit on those – though better technique and choice of pads/abrasives will make them last longer. I purchased some interface pads and back up pads as well as I did burn through some non padded paper and chewed up the red pad a bit already while applying way too much pressure to a small corner trying to strip away paint. I consider this part of the learning curve using this tool and not a defect and this is easily replaced. I’m really looking forward to using this to sand shaker doors, it really is a perfect tool for that job that I’ve been trying to do with a Bosch random orbital for far too long. I’ve also used it for sanding joint compound on drywall repairs and it leaves a really nice perfectly smooth and feathered surface.
Hannah Admin –
Andrew, we REALLY appreciate your thorough review of the sanding system. We are overjoyed that you have taken the time to learn and try new ways to increase your production and save time with sanding. We are looking forward to staying in touch with you and seeing what you accomplish in the future. Best of luck to you and thanks for being a part of the SurfPrep family.
Daniel Dunlap –
Amazing product for all my nooks and crannies! Pair this with the PROFOAM and you have a winner! Also top notch customer service!
Kimani Van Strayhorn –
Beware corners the 3×4 Ray is here! This sander and the profoam have been a welcome addition in the shop. Having a sanding pad that contours to unique surfaces without warping them is a huge production increase.
Mike Suiter –
This is the sander that I keep finding different ways to use it, from sanding a live edge and leaving all the details, to sanding narrow shaker legs and not rounding over the hard edges. With the wide variety of sandpaper and foam that SurfPrep sells, the uses for the 3×4″ are endless. I just made 20 trophies on the CNC with an outline of the state of Minnesota, and this sander with the 10mm ProFoam left all the tiny details of it! I tell people that this is the sander you didn’t know you needed until you get it!