• 3″ SurfNet Discs

    $101.20
    SurfNet Abrasives Hook & Loop (H&L) Blue Aluminum Oxide (A/O) 40 Discs/Box

  • 6″ SurfNet Pads

    $98.50
    SurfNet Abrasives Hook & Loop (H&L) Blue Aluminum Oxide (A/O) 25 Discs/Box
  • Out of stock
    LED Inspection Light

    Refurbished LED Inspection Lights

    $261.88 – $292.78

    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!

    REFURBISHED Inspection Lights ***COUPON CODES DO NOT WORK TOWARDS REFURBISHED PRODUCTS*** SurfPrep's LED Inspection Lights are used all over North America from the largest cabinet building OEM production shops, to a refinisher with a small business out of their garage. This light will help you see any imperfection on the surface you are sanding so you can deliver the best quality finished product to your customer! Customers who use this light are producing some of the best products in the world because they pay attention to detail and understand the value of investing in the best tools to get the job done right! LED Inspection Light Specifications Each LED has a 30,000 to 50,000 hour life span. LED light bar consumes 0-60 watts.  LEDs are very resistant to shock and vibration. The technology gives off very low heat per lumen for operator comfort. The warm 5,500 to 6,000K light temperature is closer to daylight, which is better for color rendition. The perfectly smooth beam quality and low level illumination make defects 10X more visible. The lenses keep the light on the table and not in the eyes of the operator. LED Inspection Light Flyer
  • Out of stock

    Refurbished 5″ TRIDENT AIR SANDERS

    $175.56 – $191.63

    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!

     

    NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.

    SurfPrep’s 5” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
    • 3/16" orbit is more aggressive and cuts faster. The larger orbit can leave a more noticeable scratch. 3/16 is better for sealer sanding with sponges.
    • 3/32" orbit is less aggressive so it is better for a final pass on raw wood to minimize scratch and swirls. It is better for sealer sanding with film or paper.
  • Out of stock

    Refurbished 3″ STORM AIR SANDERS

    $100.00

    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!

     

    NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.

    SurfPrep’s 3” Air Sander’s low-profile powerful design is perfect for use on flat or profiled surfaces. It is lightweight and durable. It is great for tight applications and hard-to-reach places where you want to save time from hand sanding. The perfect choice for touch & repair spot sanding and ‘inside radius’ sanding. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
  • Out of stock

    Refurbished 3″ X 7″ STORM AIR SANDERS

    $224.07 – $251.36

    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!

     

    NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.

    SurfPrep’s 3 2/3” x 7” Storm Air Sanders have a low profile, large footprint designed for use on flat surfaces, recessed corners, large areas & profiled moldings, etc. The durable, lightweight nylon composite bodied sanders withstand rugged industrial applications and are excellent for both prep & finish sanding. Both the Air and Electric Surge can be converted into a more “aggressive leveling sander” with the simple addition of a pad saver with SurfPrep Film cut sheets. All OEM parts are available.  You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.

  • 3″ Storm Pneumatic Pro Sanding System Kit

    $327.71
    SurfPrep | 3" | Storm Air | Pro Sanding System Kit | SPS3, SP12H, SP3PFVP (Foam, Film & Non-Woven Discs) | Non-Vacuum
  • Placeholder

    SPPOVLATCH: POV-8 & PIV-12 Motor Head Latch

    $0.00
  • Placeholder

    SPVHI: POV-8 & PIV-12 Vacuum Hose Inlet

    $12.50
  • Placeholder

    SPVBW: POV-8 & PIV-12 (Rear) Vacuum Wheel

    $36.49
    One single wheel replacement for POV-8 & PIV-12 Rear Vacuum Wheel
  • Placeholder

    SPVBW: POV-8 & PIV-12 (Front) Vacuum Wheel

    $36.49
    One single wheel replacement for POV-8 & PIV-12 Front Vacuum Wheel

  • SPCSA 1″-1″ Swivel Coupler (Static Conductive Vacuum Only)

    $15.00
  • Out of stock
    6" Trident Air Sander

    Refurbished 6″ TRIDENT AIR SANDERS

    $191.63 – $200.20

    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!

     

    NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.

    SurfPrep’s 6” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
    • 3/16" orbit is more aggressive and cuts faster. The larger orbit can leave a more noticeable scratch. 3/16 is better for sealer sanding with sponges.
    • 3/32" orbit is less aggressive so it is better for a final pass on raw wood to minimize scratch and swirls. It is better for sealer sanding with film or paper.
  •

    11″ Buffing Discs

    $37.00 – $126.80
    11" Non-Woven Abrasives Hook & Loop (H&L) 10 Discs/Box SurfPrep non-woven discs & pads are 3-dimensional and highly flexible. The flocked backing is to be used on SurfPrep Sanders with Hook & Loop backup pads (H&L). No vacuum holes are needed for vacuum sanding, the substrate will suck through abrasive and flocking.  

  • Portable Sanding Station

    $610.50
    Retailer Display
    • This display is designed for our retailers to have a sanding station for demos of SurfPrep products.
    • Many end-users have requested we offer this sanding station for small businesses.
    • The display fits a 24" LED Light (SP24ILB), a POV-8 OR PIV-12, & up to two sanders.
    • Size: 30" Width X 20" Length X 36" Tall
      • Sanding Table Dimensions: 30" Width X 20" Length
  •

    PIV-12 Single User Vacuum Hose Setup (Air Sander)

    $219.35
    Antistatic | Tapered | Pneumatic Tool | Single Vacuum Hose with air hose attached | 25mm | 12 feet | includes SPUHCMF

  • PIV-12 Dual User Vacuum Hose Setup (1 Electric/1 Air Sander)

    $358.87
    SurfPrep | Dual User | Electric & Pneumatic Tool Combo | Antistatic | Two Vacuum Hoses | 25mm | SPEVH-25mm (includes SPUHCMF), SPPVH-25MM (includes SPUHCMF & air hose), SPPVYS
  • 6" Trident Sanding System Kits with SPUHCMF

    6″ Trident Pneumatic Pro Sanding System Kits

    $407.91 – $433.48
    All 6" Trident Air Pro Sanding System Kits include
    • ProFoam
    • Blizzard Film
    • Red Riptide
    • White Lightning
    • Non-woven disc sample packs
  • Out of stock
    Sale!

    Refurbished 5″ Electric Ray Gen 2+ Sanders

    $508.19 – $509.15
    ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES! Meet the NEW Gen 2+ Random Orbital Sanders available in 3/16″ and 3/32″ range 4,000/7,000/9,000/10,000 RPM speed levels Vacuum Compatible Includes a hook and loop backup pad and PUHCMF-BL vacuum adapter
  • Placeholder

    SPPVPSC: POV-8 & PIV-12 Port Swivel Connector

    $12.00

  • High Flex Pads 3mm (Brown A/O)

    $295.00
    Size: 51/2” X 41/2” X 1/8” Dixon is the only importer of this unique 3mm thin extreme-flex pad. This Eco-friendly brown soft hand pad features an innovative adhesive that allow it to stay sharper and last longer than any other pad in the market. This pad offers the same exact benefits a the 5mm pad at 1/2 the thickness for those hard-to-reach detailed profiles. 250 Pads/Box

  • High Flex Pads 5mm (Brown A/O)

    $295.00
    Size: 51/2” X 41/2” X 3/16” This soft backed single sided pad is highly flexible and resistant to loading. It features the same exact benefits as those found in our 2-sided brown soft hand pad. Great for both white/raw wood sanding and sealer/finish sanding. Cuts quicker with less pressure minimizing operator fatigue. 250 Pads/Box

  • High Flex Pads Closed Cell 5mm (Grey S/C)

    $295.00
    Size: 51/2” X 41/2” X 3/16” This closed cell is dense, while still flexible and versatile. The sharp S/C material is coated on one side. Easy-to-hold and can be used on many different materials or substrates. 100 Pads/Box

  • 3 Sided 1/2 Sanding Block (Brown A/O)

    $185.00
    Size: 33/4” X 23/4” X 1/2” The half block is coated on one face and both sides. It is more flexible than the standard block allowing the user to work in hard-to-reach places, while conforming to the work at hand. 500 Pads/Box
Go to Top