Dust Extractors

Aspirateurs

Aspirateurs

2 produits

  • POV-8 Professional On-Site Vacuum-front

    Aspirateur POV-8

    $797.50 USD
    $797.50 USD
  • PIV-12 Vacuum

    Aspirateur PIV-12

    $1,098.90 USD
    $1,098.90 USD

Why Dust Extraction Is Not Optional 

Particles in fine sanding dust, especially those from hardwoods, MDF, and finishing coatings, are small enough to get past the body's defenses. Wood dust is recognized by both OSHA and NIOSH as a respiratory hazard that needs to be actively controlled on commercial construction sites. The best available control is a portable dust extractor.  

Dust extraction has a direct impact on finish quality in addition to health. Surface contamination appears in the finish when airborne particles land on a freshly sanded surface before the subsequent coat is applied. This is removed at the source with a dust extractor; the finish applies properly, the surface remains clean, and the air remains clear. 

Two Models. Every Shop Configuration.  

POV-8 - Professional On-Site Dust Extractor 

SurfPrep's 8-gallon portable dust extractor, the POV-8, is intended for single-operator setups and on-site use. It is ready to use right out of the box, pairs with any SurfPrep electric or pneumatic sander, and is small enough to travel between workstations.  

 Each POV-8 consists of:  

  • Static-safe 12-foot static conductive vacuum hose (SPOV25H) for handling fine particles  
  • Five SPPVCB-5 replacement collection bags  
  • The vacuum hose and electric cord organizer (SPPOVHH) maintains the site's workspace neat. 

 PIV-12 - Professional Industrial 

SurfPrep's industrial-grade dust extractor, the PIV-12, is designed to power brushless electric sanders and high-demand pneumatic sanders at the same time. designed for use in production settings where a single dust extractor must reliably support numerous operators.  

Essential skills:   

  • Allows for the simultaneous operation of two air sanders, two electric sanders, or a mix of the two.  
  • There are prefabricated 13-foot combination hoses available: 25mm vacuum hoses for electric sanders and 25mm vacuum + airline combo for air sanders.  
  • The PIV-12 unit's sanding range can be extended up to 23 feet with optional 10' extension hoses.  
  • Dual-operator configuration: 13' hose lengths are connected to a 10' 50mm vacuum hose with a Y-splitter for shared use.  
  • Power-efficient design: a typical 15-amp circuit powers the 12-amp PIV-12 and two electric sanders at 2 amps each. 

Trusted by Pros Across North America.  Shop Dust Extractors → 

POV-8 vs. PIV-12: Which Is Right for Your Shop?

Attribute POV-8 PIV-12
Type Portable on-site dust extractor Professional industrial dust extractor
Capacity 8 gallons 12 amps
Operators Single operator One or two operators simultaneously
Sander Compatibility Electric and pneumatic SurfPrep sanders Electric and pneumatic sanders — both simultaneously
Hose Length 12-foot static conductive hose included 13-foot combo hoses with optional 10-foot extension (up to 23 feet)
Circuit Requirement — Standard 15-amp circuit (with two 2-amp electric sanders)
Best For On-site work, single operator, mobile setups Production shops, dual-operator setups, high-demand environments

What a SurfPrep Dust Extractor Does for Your Work

Improved Surfaces Between Coats

When dust is captured directly at the source, the surface stays clean before applying the next coat. Every finish goes on smoother with fewer contaminants, helping you achieve a more professional result.

Improved Air Quality at Work

Fine wood dust is a known respiratory hazard. Using a dust extractor is one of the most effective ways to reduce airborne dust and create a safer working environment. On commercial construction sites where wood dust is generated, OSHA and NIOSH recommend active dust collection systems as part of proper dust control.

Compatible with Every SurfPrep Sander

Every SurfPrep electric sander—including the Ray, Storm, and Trident—is fully compatible with SurfPrep dust extractors. The PIV-12 offers the greatest flexibility for production environments, allowing electric and pneumatic sanders to operate simultaneously.

Dust-Free Sanding Starts Here.

Shop Dust Extractors →

Frequently Asked Questions 

Do I need a dust extractor if I’m already wearing a respirator? 

Although it lessens personal exposure, a respirator cannot stop surface pollution or remove dust from the air. By capturing particles at their source, a dust extractor shields the surface and the operator. OSHA mandates active dust controls in addition to personal protective equipment on commercial construction sites. 

What’s the difference between the POV-8 and PIV-12? 

The POV-8 is a portable dust extractor that may be used on-site by one person. With an extended hose reach of up to 23 feet, the PIV-12 is an industrial-grade dust extractor designed for production settings that can handle one or two operators at once. 

Are SurfPrep dust extractors compatible with all SurfPrep sanders? 

Indeed. The whole SurfPrep sander line, including both electric and pneumatic models, is compatible with both the POV-8 and PIV-12. The PIV-12 accommodates dual-operator configurations and comes with combination hoses for both types of sanders. 

Can the PIV-12 run on a standard electrical circuit? 

Indeed. The PIV-12's 12-amp draw and two electric sanders operating at 2 amps each allow it to function on a typical 15-amp circuit. No extra wiring or dedicated circuit is needed. 

What accessories are included with the POV-8? 

Five replacement collecting bags, a vacuum hose and power cord organizer, and a 12-foot static conductive vacuum hose are all included with the POV-8. Everything needs to begin dust-free sanding right away. 

 Dust-Free Sanding Starts Here. Pair with Any SurfPrep Sander. 

SurfPrep offers the portable dust extractor for your setup, whether you're using a dual-operator industrial dust extractor in a manufacturing facility or a single portable dust extractor on a construction site. Built to keep your surfaces clean and your air fresh, it is compatible with all SurfPrep sanders and is supported by more than 50 years of surface preparation experience. 

Dust-Free Sanding Starts Here. Pair with Any SurfPrep Sander.  Shop Dust Extractors → 

In Stock & Ready to Ship  ·  1-Year Manufacturer’s Warranty  ·  Built for Professionals