Accessories

  •

    10,000 RPM Muffler Kit (3″ X 4″ Storm Air Sanders)

    $9.08
    Muffler Repair Kit for 3"X4" Storm Air Sander Part number on Manual is (SPA0095)

  • 12′ Electric Ray Power Cord

    $38.32

  • 2.5mm Hex Wrench

    $1.06

  • 3″ Backup Pads

    $14.16
    SurfPrep 3” Backup Pad Hook & Loop

  • 3″ X 4″ Backup Pads

    $19.56
    3" X 4" Hook & Loop Backup Pads    

  • 3″ X 4″ Lever Replacement (3″ X 4″ Electric Ray Sanders)

    $8.25
    Lever replacement for SurfPrep 3" X 4" Electric Ray sanders.

  • 3″ X 4″ Lever Replacement Full Kit (3″ X 4″ Electric Ray Sanders)

    $28.59

  • 3″ X 7″ Backup Pads

    $29.36 – $29.39
    3 2/3" X 7" Hook & Loop Backup Pads To be used with: https://surfprepsanding.com/product/3-2-3-x-7-storm/      

  • 3″ X 8″ Backup Pads

    $32.70
    3" X 8" Hook & Loop Backup Pads To be used with: https://surfprepsanding.com/product/3x8-electric-ray-sanders-copy/        

  • 5″ Backup Pads

    $21.12 – $37.34
    SurfPrep Backup Pads come in a variety of options depending on the products you are using as well as the surface you're sanding.
    • Hook & Loop Backup Pads are made with smaller 'hooks' which are excellent for the ‘quick release’ of SurfPrep Foam abrasives.
    • J-Hook Backup Pads have a longer hook design that works well with SurfPrep Pad Savers, Interface Pads, Film, Paper, & Non-Woven Discs/Pads.
    • PSA are meant to be used with 'Pressure Sensitive Adhesive (sticky) backed abrasives for flat sanding.
    • Original Backup pads are made with
    To be used with SurfPrep 5" Sanders: https://surfprepsanding.com/product/5-trident/ https://surfprepsanding.com/product/5-electric-ray-sanders/

  • 6″ Backup Pads

    $22.92 – $43.00
    SurfPrep Backup Pads come in a variety of options depending on the products you are using as well as the surface you're sanding.
    • Hook & Loop Backup Pads are made with smaller 'hooks' which are excellent for the ‘quick release’ of SurfPrep Foam abrasives.
    • J-Hook Backup Pads have a longer hook design that works well with SurfPrep Pad Savers, Interface Pads, Film, Paper, & Non-Woven Discs/Pads.
    • PSA are meant to be used with 'Pressure Sensitive Adhesive (sticky) backed abrasives for flat sanding.
    • Original Backup pads are made with
    To be used with SurfPrep 6" Sanders: https://surfprepsanding.com/product/6-trident-air-sanders/ https://surfprepsanding.com/product/6-electric-ray-sanders/  

  • Air Hoses

    $30.98 – $40.69
    O.D. ½” / I.D. ¼” Rated at 300PSI SurfPrep's Ball Swivel Air Hose allows operators to maneuver sander in and out of tight areas without any restrictions. The hoses are one-of-a-kind for a couple of reasons. First, the hose has an ergonomic, lightweight connection to the sander and never needs to be disconnected from the tool. This stops air leaks because the bearings are not going to become worn out like other hoses in the industry.

  • Backup Pad Screws (4-Pack)

    $2.20
    set of 4 replacement screws for Backup Pad (rectangular sanders) 2.5mm L-Allen Wrench needed

  • Hand Sanding Block

    $17.48
    SurfPrep's 3" X 4" Hand Block is meant to be used with 3" X 4" Film & Foam abrasives. The pad allows easier hand sanding may not be the best choice at hand.

  • Hex Socket Countersunk Head Machine Screw (4-Pack)

    $2.20
    set of 4 replacement screws for rectangular sanders.

  • Pad Supports – Set of 2 (3″ X 4″ Electric Ray Sanders)

    $16.94

  • Vacuum Collection Bags (5 Pack)

    $74.25
    POV-8 & PIV-12 Vacuum Collections Bags (5/Pack)

  • POV-8 Dual User Vacuum Hose Accessory Package

    $160.75

    This vacuum hose package is to be used with SurfPrep's POV-8 Vacuum system.

    This specific setup comes with the following parts:

    • 1 Vacuum Hose Y-Splitter (SPPVYS)
    • 1 Y-Splitter Electric Cord (SPPECYS)
    • 1 Hose Connector (SPUHCMF)
    • 12' Antistatic 25mm Vacuum Hose (SPOV25H)
  •

    POV-8 HEPA Filter Replacement (2 Pack)

    $102.00
    POV-8 HEPA Filter Replacements (2/Pack)

  • Sander Vacuum Conversion Kits

    $33.95 – $70.68
    If you currently own a SurfPrep sander and are deciding to go the 'dustless' route, we have conversion kits that make it easy to convert your tool over for vacuum sanding. Each kit includes the pieces necessary for converting your tool to vacuum: a conversion piece and a backup pad with vacuum holes.  Keep in mind that PNEUMATIC sanders are available in 'Central Vacuum' and 'Self Generated Vacuum' options. ELECTRIC sanders are only available in 'Central Vacuum'.
    *TOOL NOT INCLUDED*
     

  • Socket Flat Counter Sunk Machine Screw

    $0.36
    4MM Allen Wrench

  • SPA1-1: 1″-1″ Swivel Coupler

    $11.28
    This coupler will connect a 1" threaded vacuum hose to a 1" threaded vacuum hose.
    • VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
    *SurfPrep is not responsible for return shipping costs if vacuum adapter does not fit the vacuum you own.

  • SPB0101

    $15.73

  • SPCX: 1″-2.25″ Vacuum Port Reducer

    $18.96
    This vacuum port reducer is a 2" diameter. It will slide into the 2.25" unthreaded intake port of most vacuum systems. SurfPrep's 1" Vacuum Hoses will screw into the other side. We recommend purchasing SurfPrep's Vacuum Hose to screw into this reducer.
    • VACUUM HOSE IS NOT INCLUDED WITH THIS PART. CLICK HERE TO FIND A VACUUM HOSE TO ATTACH TO YOUR ADAPTER
    *SurfPrep is not responsible for return shipping costs if vacuum adapter does not fit the vacuum you own.

Title

Go to Top