The industries best Air and Electric sanders.
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 3” Electric Ray Sander’s low-profile powerful design is perfect for use on flat or profiled surfaces. It is lightweight and durable. It is great for tight applications and hard-to-reach places where you want to save time from hand sanding. The perfect choice for touch & repair spot sanding and ‘inside radius’ sanding.
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 3 2/3” x 7” Storm Air Sanders have a low profile, large footprint designed for use on flat surfaces, recessed corners, large areas & profiled moldings, etc. The durable, lightweight nylon composite bodied sanders withstand rugged industrial applications and are excellent for both prep & finish sanding. Both the Air and Electric Surge can be converted into a more “aggressive leveling sander” with the simple addition of a pad saver with SurfPrep Film cut sheets. All OEM parts are available. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
Surfprep’s 5” ‘brushless’ electric sander is the lowest profile, operator friendly, power packed, energy efficient random orbital sander. Lightweight at just 2.5 pounds. The Ray allows operators to sand ‘on-site’ because the tool plugs directly into a standard electric outlet. The power supply is built in the tool with a ‘direct wire’ design that allows for easy set up and operation (no external power supply box / plugs directly into outlet). Annual electricity costs for operating the 5” or 6” Ray 4 hour/day, 240 days/year at $0.0007 kWh is just over $20.00 per year. These tools are available in 3/16” & 3/32” orbits. Central vacuum option available to maintain a clean working environment. The rate of cut & power of the Ray puts the sander in a class of its own!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 5” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
Surfprep’s 6” ‘brushless’ electric sander is the lowest profile, operator friendly, power packed, energy efficient random orbital sander. Lightweight at just 2.5 pounds. The Ray allows operators to sand ‘on-site’ because the tool plugs directly into a standard electric outlet. The power supply is built in the tool with a ‘direct wire’ design that allows for easy set up and operation (no external power supply box / plugs directly into outlet). Annual electricity costs for operating the 6” Ray 4 hour/day, 240 days/year at $0.0007 kWh is just over $20.00 per year. These tools are available in 3/16” & 3/32” orbits. Central vacuum option available to maintain a clean working environment. The rate of cut & power of the Ray puts the sander in a class of its own!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 6” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 3” Air Sander’s low-profile powerful design is perfect for use on flat or profiled surfaces. It is lightweight and durable. It is great for tight applications and hard-to-reach places where you want to save time from hand sanding. The perfect choice for touch & repair spot sanding and ‘inside radius’ sanding. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 3 2/3” x 7” Storm Air Sanders have a low profile, large footprint designed for use on flat surfaces, recessed corners, large areas & profiled moldings, etc. The durable, lightweight nylon composite bodied sanders withstand rugged industrial applications and are excellent for both prep & finish sanding. Both the Air and Electric Surge can be converted into a more “aggressive leveling sander” with the simple addition of a pad saver with SurfPrep Film cut sheets. All OEM parts are available. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
THIS IS NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep's 3" X 4" Electric Ray is power packed with 3 speeds (4,000, 7,000 & 9,000 RPM). It's brushless outer-runner motor is constructed with bigger magnets, providing greater torque which saves energy compared to inner-runner motors. The tool's computer board is completely protected with a patented rubberized seal preventing environmental contamination. Patented spindle bearing fan enhances life by keeping motor & bearings at a lower temperature. Electric Ray Sanders have significant energy cost savings compared to pneumatic sanders as well as two override protection programs to enhance the life of the tool.
ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 5” ‘brushless’ electric sander is the lowest profile, operator friendly, power packed, energy efficient random orbital sander. Lightweight at just 2.5 pounds. The Ray allows operators to sand ‘on-site’ because the tool plugs directly into a standard electric outlet. The power supply is built in the tool with a ‘direct wire’ design that allows for easy set up and operation (no external power supply box / plugs directly into outlet). Annual electricity costs for operating the 5” or 6” Ray 4 hour/day, 240 days/year at $0.0007 kWh is just over $20.00 per year. These tools are available in 3/16” & 3/32” orbits. Central vacuum option available to maintain a clean working environment. The rate of cut & power of the Ray puts the sander in a class of its own!ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 5” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s Refurbished 6” ‘brushless’ electric sander is the lowest profile, operator friendly, power packed, energy efficient random orbital sander. Lightweight at just 2.5 pounds. The Ray allows operators to sand ‘on-site’ because the tool plugs directly into a standard electric outlet. The power supply is built in the tool with a ‘direct wire’ design that allows for easy set up and operation (no external power supply box / plugs directly into outlet). Annual electricity costs for operating the 6” Ray 4 hour/day, 240 days/year at $0.0007 kWh is just over $20.00 per year. These tools are available in 3/16” & 3/32” orbits. Central vacuum option available to maintain a clean working environment. The rate of cut & power of the Ray puts the sander in a class of its own!ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES.
SurfPrep’s 6” Trident Sanders are designed with a durable composite body. They are lightweight with a compact, recessed throttle lever. It is ergonomically balanced for added comfort and control for the operator. Its cutting edge ‘cooling fan’ creates air flow around the counter balance spindle bearing which enhances the life of the tool. The Trident motor assembly is constructed of hardened steel for the cylinder and both end plates. A 360° swivel exhaust grate allows operator to redirect air flow. This new design no longer has an external cap/filter to lose or damage. The tool also has a redesigned, low-profile speed control. You will need a VERY LARGE air compressor to run this sander. See video below before purchasing an air sander.
ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
REFURBISHED Inspection Lights ***COUPON CODES DO NOT WORK TOWARDS REFURBISHED PRODUCTS*** SurfPrep's LED Inspection Lights are used all over North America from the largest cabinet building OEM production shops, to a refinisher with a small business out of their garage. This light will help you see any imperfection on the surface you are sanding so you can deliver the best quality finished product to your customer! Customers who use this light are producing some of the best products in the world because they pay attention to detail and understand the value of investing in the best tools to get the job done right! LED Inspection Light Specifications Each LED has a 30,000 to 50,000 hour life span. LED light bar consumes 0-60 watts. LEDs are very resistant to shock and vibration. The technology gives off very low heat per lumen for operator comfort. The warm 5,500 to 6,000K light temperature is closer to daylight, which is better for color rendition. The perfectly smooth beam quality and low level illumination make defects 10X more visible. The lenses keep the light on the table and not in the eyes of the operator. LED Inspection Light Flyer
ALL REFURBISHED SANDERS ARE FINAL SALE! NO RETURNS & NO EXCHANGES!
REFURBISHED SurfPrep Professional On-Site Vacuum Includes: 16 foot static conductive vacuum hose |Hose Adapter to connect it to the sander (SPUHCMF) | 5 Replacement Collection BagsIf you are wanting a sanding system that comes with sandpaper variety packs please check out our Woodworking Sanding System:
$306.00 – $615.00Select options
