3″X4″ Electric Ray Sanders

3″X4″ Electric Ray Sanders

$586.29$677.43


Purchase Options:
SKU: 3X4ELECTRIC Categories: ,

PRODUCT OVERVIEW:


Purchasing a Sanding System with a Tool Box will save 5% on purchase of Tool Box

THIS IS NOT A SANDING SYSTEM. DOES NOT INCLUDE ABRASIVES. CLICK HERE FOR KIT

SurfPrep’s 3″ X 4″ Electric Ray is power packed with 3 speeds (4,000, 7,000 & 9,000 RPM). It’s brushless outer-runner motor is constructed with bigger magnets, providing greater torque which saves energy compared to inner-runner motors. The tool’s computer board is completely protected with a patented rubberized seal preventing environmental contamination. Patented spindle bearing fan enhances life by keeping motor & bearings at a lower temperature. Electric Ray Sanders have significant energy cost savings compared to pneumatic sanders as well as two override protection programs to enhance the life of the tool.  

Customer Reviews:

2 reviews for 3″X4″ Electric Ray Sanders

  1. manu

    wow this truly an innovative product, i was comparing this to a Festool linear sander because cabinet profile sanding was driving me nuts…but this is a CLEAR winner on paper!! i really want to get the electric 3*4 kit from you all.

  2. ANDREW WILSON

    I really thought long and hard about spending this much for a sander, and whether to buy this one over other options on the market. In the end, I am extremely pleased with this purchase. I’ve been replacing all the trim in my house, stripping old paint off jambs etc., and the task of sanding and preparing for paint has been made way easier with this tool. I purchased the system with a full assortment of abrasives which was a generous selection and great starting point, but expect to spend another couple hundred dollars to buy larger quantities of the ones you need most frequently. My favorite aspect of this tool is the form factor, it is light with multiple ways to grip and I’ve sanded for hours at a time without any fatigue. The dust collection has also been phenomenal using a little Ridgid shopvac, I really don’t notice much dust after hours of hard sanding. Doing tough sanding on trim profiles and for stripping will go through abrasives quickly, so again prepare to spend a bit on those – though better technique and choice of pads/abrasives will make them last longer. I purchased some interface pads and back up pads as well as I did burn through some non padded paper and chewed up the red pad a bit already while applying way too much pressure to a small corner trying to strip away paint. I consider this part of the learning curve using this tool and not a defect and this is easily replaced. I’m really looking forward to using this to sand shaker doors, it really is a perfect tool for that job that I’ve been trying to do with a Bosch random orbital for far too long. I’ve also used it for sanding joint compound on drywall repairs and it leaves a really nice perfectly smooth and feathered surface.

    • Hannah Admin

      Andrew, we REALLY appreciate your thorough review of the sanding system. We are overjoyed that you have taken the time to learn and try new ways to increase your production and save time with sanding. We are looking forward to staying in touch with you and seeing what you accomplish in the future. Best of luck to you and thanks for being a part of the SurfPrep family.

Add a review

You may also like…

Share This Product

Title

Go to Top